White Knight Dryer Troubleshooting

White Knight dryer troubleshooting

If you realize you have problem with your dryer (not heating and so on), you can prepare for the worst but first of all you need to see some useful advice from the troubleshooting manual. White knight gas tumble dryer repairs is what shouldn’t make you scary if you follow such guide. It is the best thing for solving technological problems.

Problem Solution
White knight Tumble dryer, not heating• Possible heating element fault
• Possible rear thermostat
• Possible cut out thermostat system
• Possible forward thermostat
• possible program timer fault
• Possible relay on PCB or faulty circuit board
White knight Tumble dryer not turning• Snapped or broken belt
• Capacitor on the motor 
• Motor fault
• Possible timer fault or relay on the circuit board
• Broken wire or bad connection
White knight Tumble dryer not drying quickly in allocated time• Kink or blockage in venting tube
• One side of the heating element may have gone faulty therefore only drying on half heat
• Fluff build up in the ducting tube or vent pipes
• Faulty circulation fan blade
• Fluff build up on circulation fan
White knight Tumble dryer not starting• Possible door lock fault
• Possible switch pin
• Possible relay fault on the board or timer fault
White knight Tumble dryer not finishing cycle
• If the machine keeps running then faulty timer or if it has auto sensor then it may have faulty NCT sensor